EC4 Pneumatic Evo Enamel Wire Stripper:

1 Stripping Insert is supplied free of charge (of your choice) with the EC4 Pneumatic Enamel Wire Stripper, please list in the comments which Stripping Insert size/part number you require when purchasing.

The EC4 Pneumatic Enamel/Magnet Wire Stripper will strip many film insulations including Enamel, Varnish, Formvar, MI etc for a range of wire sizes between 29 AWG (0.28mm O.D) and 8 AWG (3.25mm O.D). Using a high speed rotary stripping insert, which is precisely adjustable to match the diameter of the bare conductor, surface insulation is easily removed. The insert in the EC4 Magnet Wire Stripper is held in a special adjustable chuck assembly which, when locked in position, allows precise repetitive stripping without risk of damage to the conductor.

EC4 Pneumatic Enamel Wire Stripping Machine Operation - Simple Setup & Stripping Operation:
1. Loosen the chuck assembly with the two wrenches provided.
2. Place stripping insert into the chuck and hand tighten.
3. Place the work piece into the insert and tighten the chuck assembly with the wrenches provided so that the insert closes but the work piece can still be removed.
4. Remove the work piece and start the EC4.
5. Strip the wire by pushing into the stripping insert and remove to examine.
6. If insulation is not completely removed, switch off the EC4, tighten chuck assembly and repeat stripping operation

EC2/EC4 Stripping Insert Selection:

AWG
Nominal
O.D. mm
Cross Section
Area mm2
Conical
Face
Flat
Face
Tapered
Bullet
Slot Size Tech
Info Only
Carbide
(Flat Face)
29-200.28-0.810.06-0.52C1 (UK3341)F1 (UK3351)B1 (UK3361)0.8mm728C
20-160.81-1.300.52-1.33C2 (UK3342)F2 (UK3352)B2 (UK3362)1.2mm732C
16-141.30-1.631.33-2.09C3 (UK3343)F3 (UK3353)B3 (UK3363)1.6mm736C
14-121.63-2.062.09-3.33C4 (UK3344)F4 (UK3354)B4 (UK3364)2.0mm738C
12-102.06-2.593.33-5.27C5 (UK3345)F5 (UK3355)B5 (UK3365)2.4mm-
10-82.59-3.255.27-8.30C6 (UK3346)F6 (UK3356)-2.8mm-
8-63.25-4.118.30-13.30C7 (UK3347)F7* (UK3357)---
6-44.11-5.1813.30-21.10-F8* (UK3358)---

*Note: To use F7 & F8 Inserts, the larger chuck assembly must be purchased: UK3305

Stripping Insert Options:
Tapered Bullet: For stripping in confined areas.

Conical Face: For ease of wire entry into insert.

Flat Face: For stripping flush to the coil body.

Technical Data
Available Wire Size (Round) 0.28-5.18mm O.D. (4-29 AWG - 0.06-21.10mm²)
Dimensions 270 x 38mm
Required Air Supply 60-70 PSI (Oil Daily)
Warranty 12 Months
Weight 1Kg

Write a review

Please login or register to review

EC4 Pneumatic Evo Enamel Wire Stripper

EC4 Pneumatic Evo Enamel Wire Stripper

  • Brand: Series 4
  • Product Code: MUK3400
  • Availability: Out Of Stock
  • £408.39

  • Ex Tax: £340.33

Available Options


Related Products

EC2/EC4 Conical Face Inserts

EC2/EC4 Conical Face Inserts

EC2/EC4 Conical Face Inserts

£46.20 Ex Tax: £38.50

EC2/EC4 Flat Face Inserts

EC2/EC4 Flat Face Inserts

EC2/EC4 Flat Face Inserts

£46.20 Ex Tax: £38.50

EC2/EC4 Bullet Nose Inserts

EC2/EC4 Bullet Nose Inserts

EC2/EC4 Bullet Nose Inserts

£46.20 Ex Tax: £38.50

EC2 Evo Enamel Wire Stripper

EC2 Evo Enamel Wire Stripper

EC2 Evo Enamel Wire Stripper

£629.69 Ex Tax: £524.74

Tags: EC4 Pneumatic Evo Enamel Wire Stripper